Torque Specifications

Front suspension & steering

UCA bushings M12 75
LCA bushings M14 125
Track bar bushing frame M14 125
Track bar bushing axle M14 125
Stabilizer end link top M12 65
Stabilizer end link bottom M12 75
Shock Absorber upper M12 bayonet 20
lower M12 56
Steering gear 87
P/S pump to engine 21
High pressure hose pump 22
Hoses to steering gear 21
Intermediate shaft, all points M10 42
Intermediate shaft toe plate 100 in. lbs.
Steering damper axle M12 50
cross-link M12 50
Pitman arm to gear 7/8 195
Pitman to drag link nut M14 78
Drag link to knuckle nut M14 63
Tie rod to knuckle nut M14 63
Tie rod clamp M10 45
Drag link clamp M10 26

 

Rear suspension

UCA bushings M14 125
LCA bushings M14 125
Track bar bushing frame M14 96
Track bar bushing axle M14 111
Stabilizer bar sill bushing M10 45
Stabilizer bar to link M12 66
Stabilizer bar link to axle M12 75
Shock Absorber upper M8 37
lower M12 56

 

Wheels

(5” bolt circle/1.75” offset) 5 x 1/2” stud 105

 

Transmission mounts

M10 trans to mount 40
M10 mount to frame 40

 

Powertrain mounts

M10 bracket to block 45
M12 bracket to block 90
M12 Isolator to frame 85
diesel bracket to engine 85
diesel M12 Hydro mt to bracket 65
diesel M12 Hydro mt to frame 65

 

Body mounts

M10 short bolts 45
M12 stud FESM 80

 

For a more detailed list of Jeep Wrangler JK torque specifications, check out Project JK.

 NOTE: Every effort has been made to ensure this information is factual and accurate. As with anything sourced from the Internet, however, use your best judgment with following this guide.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s